Some considerations for lawn mowers

Clearing the site

Remove rocks, branches, and all kinds of debris. Mark nozzles and obstacles.

Dress code: thick-soled shoes and long pants, mainly to prevent the blade from hitting up rocks and splashing and injuring people.

Grounds: Slopes with an angle of more than 15 degrees cannot be mowed to prevent injury and damage to machinery. It is not allowed to cut grass immediately after rain and watering, in order to prevent people from slipping and the machinery does not work well.

Special emphasis on: mowing machine operation, 10 meters within the range of people can not be, especially the side row when the side row mouth can not be to people. Adjust the machinery and pour grass must stop. Never adjust the machine and pour grass when the machine is running.

Height adjustment: according to the requirements of the lawn to determine the stubble height after mowing, the south of the warm-season lawn stubble is generally 3 centimeters, the north of the cool-season lawn stubble height of 5 centimeters. Cut the height of the grass cut for the original height of the grass one-third, cut the grass can only along the slope lateral pruning, and can not be downhill up and down pruning. Be especially careful when turning corners on slopes. Beware of burrows, ditches, mounds, etc. and obstacles in the grass.

SAFETY HANDLE FUNCTION AND USE: The lawn mower's safety control handle is a cease-fire switch that controls the flywheel brake and ignition coil. Pressing and holding the safety control handle releases the flywheel brake, disconnects the cease-fire switch, and the gasoline engine can start and run. Conversely, when the safety control handle is released, the flywheel is braked, the ignition coil cease-fire switch is connected, and the gasoline engine stops and is braked. That is, the lawn mower can run normally only if the safety control handle is held down, and when an emergency is encountered during operation, releasing the safety control handle stops the lawn mower. Therefore, the safety control handle should never be tied down with a wire while running.